Vertrauen Fossil-Drivers

ADF v1.50 serial port FOSSIL driver ADF is a serial port FOSSIL driver for high speed modem users. Supports FIFO UARTs 16550, 16650 and 16750, 115200 bps, any port, any IRQ, any FIFO trigger level, FOSSIL rev level 5 and multitasking environments (such as Windows 3, Windows 95 and OS/2).

BNU Fossil Driver, wide-beta version 1.89h. This version of BNU is not supported by the author, and does not include documentation.

cFos/2 3.80 - COM Port Emulator for ATM & ISDN CAPI! Serial device driver that interfaces with ISDN CAPI 1.1 and 2.0 PDD. Supports 32 ports simultaneously; controlled by a powerful AT command set. Supports Channel Bundling, Data Compression, X.75, V.110, V.120, X.31, BTX, PPP conversion, analogue modem, fax command set, ISDN time-synchronization, CTI support, Remote Config... Many options! Fast & easy access to Internet, CompuServe, Datex-J, AOL, Mailboxes, ATM... -*- New! Basic Firewall included! -*- Freely distributable Shareware - Run OS2SETUP to install - Problems? Ask support@cfos.de

cFos/DOS 3.80 - ISDN CAPI MultiPort FOSSIL Driver ISDN CAPI FOSSIL Driver and INT 14 emulator for highest cps-rates. Allows applications to communicate via ISDN using any CAPI. Supports 4 ports simultaneously, controlled by a powerful AT command set. Supports CAPI 1.1 and 2.0, Channel Bundling, X.75, V.110, V.120, X.31, BTX, analogue modem, Data Compression, Logfile, Remote Config, ISDN time-synchronization... Many options! Freely distributable Shareware - Run DOSSETUP to install - Problems? Ask support@cfos.de

FCI Fossil Compatible Interface Version 1.06 New Fossil Driver with everything you need! -------------------------------------------- Support for multi serial board /w shared irq Support for 80386 or higger Support for polled UART Support for multi tasking Support for buffered UART Support for off during INT 13 And more ...

------------------------------------ Rev 5 FOSSIL Interface Library v1.20 by David Nugent, 3:632/348@Fidonet ------------------------------------

The Official FOSSIL level 5 Specification Anyone developing their own fossil driver needs to make it complient with the level 5 specifications.

Magnum Fossil is a simple implementation of a fossil allowing you to run Dos Doors under any OS/2 BBS that uses file handles for I/O. -------------------------------------------- - Works under OS/2 2.0 and 2.1 - Supports Multi-Nodes - Supports any Door that supports a Fossil - Source code has been fully optimized, with OS/2 Portion written in 32-Bit C and DOS portion written in Turbo Assembler for maximum speed.

MX5 Revision 5 fossil driver for BBS software

NTFOSS V1.0 NTFOSS is a virtual FOSSIL driver for Windows NT. NTFOSS runs with DOS-Programs in a DOS-Box. All baudrates which are supported by your Windows NT configuration and by the FOSSIL specification can be configured. Locked baudrates are also supported. With VFOSSIL support, key system. NTFOSS is dynamically configurable, install/uninstallable for each virtual DOS Machine. Trial version for 45 days. Distributed as Shareware. (c) 1995-1997 by Gerhard Wiesinger

OpusComm.Com - FOSSIL Level 5 driver. OpusComm is a TSR Fossil Level 5 driver that supports 2 serial ports. It's used by BBS (Buletin Board System) Programs, such as Opus

ONEFOSsil, Revision 9, versatile single port high speed FOSSIL 5 compatible communications driver for MS-DOS based software under DESQview or Windows multitasking systems. Major bugs and compatibility problems fixed. ONEFOSsil can support multiple ports and shared IRQs. Includes support for VFOSSIL. Shareware: $10. Written by Carl Morris, published by Morris Softronics.

Usefull for opening/closing the fossil before\after running a DOS door from a 32bit BBS: OPENFOS will open the fossil driver CLOSEFOS will close it.

RLFOSSIL is an implementation of multi-line serial port driver corresponding to the Fido/Opus/Seadog level 5 specification and a simple HAYES-compatible modem emulator. It allows applications usually worked through BBS's to run on the Internet, or in IP-based local net.er, and rlogin and telnet emulation using IP services numbers 513 & 23. RLFOSSIL allows combined work with other FOSSIL drivers (X00,BNU etc.).

Ray Gwinn's comm drivers for OS/2, V1.60d. SIO.SYS and VSIO.SYS are replacements of the OS2 communications drivers COM.SYS and VCOM.SYS which come with OS/2. VX00.SYS provides FOSSIL and virtual 16550 support for DOS programs SIO can be ordered to supporting any number of ports. Vmodem now has both inbound and outbound Telnet.

┌─────────[ WinFOSSIL v1.12 ]──────────────┐ │ 32-bit FOSSIL driver for Windows 95. │ │ Dramatically improves transfer speeds │ │ FOSSIL-aware software written running │ │ under Windows 95. Includes support for │ │ FOSSIL-aware 32-bit applications such as │ │ Binkleyterm-32! SHAREWARE │ └─────────── $15.00 Registration! ─────────┘

┌─[ WinFOSSIL for Windows NT v1.00 BETA 3 ]─┐ │ BETA version of 32-bit FOSSIL driver for │ │ Windows NT 4.0. Dramatically improves │ │ transfer speeds for FOSSIL-aware │ │ software running under Windows NT. │ │ Now includes VMODEM support. │ │ SHAREWARE │ └─────────── $25.00 Registration! ──────────┘