If you are using CHRIP I'd advise you to *#:STOP*#: before it's too
late. You may get away with it a few times but eventually it WILL
catch up to you.
If you are using CHRIP I'd advise you to *#:STOP*#: before it's too
late. You may get away with it a few times but eventually it WILL
catch up to you.
Good thing I didn't use that to program the Baofeng UV-5R that I won
at the Shreveport Hamfest last year. Right now, all I use it for is to monitor the local Skywarn Nets.
Hi Daryl!
UV-5R programming is save.
Daryl had problems with Yaesu.
I programmed my UV-5r, BF-F8+ and UV-B5 many times with Chirp.
Works perfectly!
I programmed my UV-5r, BF-F8+ and UV-B5 many times with Chirp.OK, I'll have to get a repeater database listing, and program it
Works perfectly!
with that. The thing is, the UV-5R doesn't put out much power (it
wasn't designed to)
Besides, what did I expect for under $50??...
Hi Daryl!
OK, I'll have to get a repeater database listing, and program it
with that. The thing is, the UV-5R doesn't put out much power (it wasn't designed to)
It should give you 4W.
Besides, what did I expect for under $50??...
They were down to 22 USD on amazon.
Now they cost slightly under 30 USD.
Sysop: | digital man |
---|---|
Location: | Riverside County, California |
Users: | 1,031 |
Nodes: | 17 (0 / 17) |
Uptime: | 01:01:55 |
Calls: | 503,584 |
Calls today: | 14 |
Files: | 136,297 |
D/L today: |
11,388 files (1,972M bytes) |
Messages: | 443,205 |
Posted today: | 2 |