1. Forum
  2. FidoNet
  3. CBM

  • SCSI IEC ADAPTER

    From Charles Gutman@3:770/3 to All on Thursday, June 06, 2019 23:22:53
    Does anyone out there have any documentation on how to build a scsi adapter for the iec port?
    If not, how about scsi to Expansion port?
    I got a very nice scsi hard drive and am trying to get it hooked up.

    Thanks so much

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From Anssi Saari@3:770/3 to Charles Gutman on Tuesday, June 11, 2019 11:13:21
    Charles Gutman <charlesgutman@gmail.com> writes:

    Does anyone out there have any documentation on how to build a scsi adapter
    for the iec port?
    If not, how about scsi to Expansion port?
    I got a very nice scsi hard drive and am trying to get it hooked up.

    Thanks so much

    A quick Google found one at http://www.6502.org/users/andre/cbmhw/scsi/index.html#c64scsi. The
    hardware doesn't seem that complicated and some variant of it has even
    been tested, probably back in the 90s though.

    Software support exists but you'd probably have to integrate that into
    whatever you're planning to run yourself.

    You're probably better off if you forget SCSI and go with something you
    can buy today like a 1541 Ultimate or sd2iec for example.

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)