Date: Thu, 04 Oct 2012 22:58:50 -0400
From: rgorkov
To: WILLIAM CHANEY
Subject: Re: wcmail error
Newsgroups: win.server.program
Message-ID: <1349405930.32.1270830162@winserver.com>
References: <1270830162.32.1270793697@winserver.com>
X-WcMsg-Attr: Rcvd
X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
Lines: 32

I am having the same error message...

any help?






On 4/9/2010 11:19 AM, WILLIAM CHANEY wrote to WILLIAM CHANEY:

Here's the wcmail log file.

20100409 11:16:57 (MAIN) Starting wcMail v6.3.453.3
20100409 11:16:57 (MAIN) (c) copyright 1998-2010 by Santronics Software Inc. 20100409 11:16:57 (MAIN) Wildcat! Server: WILLIAM-PC
20100409 11:16:57 (MAIN) wcMail Computer: WILLIAM-PC
20100409 11:16:57 (MAIN) - Import HTML Email : YES
20100409 11:16:57 (MAIN) # Starting Mail Import Processors
20100409 11:16:59 (MAIN) Error starting host domain thread. See wcmail*.log file

"WILLIAM CHANEY" wrote in message news:1270793697.32.0@winserver.com...

I keep getting an error when ever I click on wcmail .
"Error starting host domain thread. See wcmail*.log file"
Has anybody ever seen this. Any help would be appreciated.

Bill

--- Platinum Xpress/Win/WINServer v3.1
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)

Date: Fri, 05 Oct 2012 01:26:15 -0400
From: MICHAEL PURDY
To: rgorkov
Subject: Re: wcmail error
Newsgroups: win.server.program
Message-ID: <1349414775.32.1349405930@winserver.com>
References: <1349405930.32.1270830162@winserver.com>
X-WcMsg-Attr: Rcvd
X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
Lines: 70

The same error may or may not mean the same root cause.

I would recommend you:

a) Post your log snippet showing the lines before and after the error message b) Post the associated wcMail.log entries (if any)
c) Indicate whether you are processing just ordinary email or email + UUCP/Newsgroup

Things to check and try:

a) Run wcRepair
b) Run a chkdsk /f
c) Make sure your OS R+W Permissions to directories etc are correct
d) Temporarily disable any Anti-Virus Programs (especially Grisofts AVG)
e) Temporarily disable any third party DyDNS / No IP Software clients

Most importantly:

f) Take a close look at your

wcCONFIG -> Mail Server -> Primary Domain - DefaultHost

config. Pay particular attention to the domain name and Spool path
settings especially whether or not the specified SPOOL path is accessible.

In short the more log / info you can provide to Hector the better the
chance he will be able to assist you.

Mike



On 10/4/2012 10:58 PM, rgorkov wrote to WILLIAM CHANEY:

I am having the same error message...

any help?

On 4/9/2010 11:19 AM, WILLIAM CHANEY wrote to WILLIAM CHANEY:

Here's the wcmail log file.

20100409 11:16:57 (MAIN) Starting wcMail v6.3.453.3
20100409 11:16:57 (MAIN) (c) copyright 1998-2010 by Santronics

Software Inc.

20100409 11:16:57 (MAIN) Wildcat! Server: WILLIAM-PC
20100409 11:16:57 (MAIN) wcMail Computer: WILLIAM-PC
20100409 11:16:57 (MAIN) - Import HTML Email : YES
20100409 11:16:57 (MAIN) # Starting Mail Import Processors
20100409 11:16:59 (MAIN) Error starting host domain thread. See

wcmail*.log

file

"WILLIAM CHANEY" wrote in message news:1270793697.32.0@winserver.com...

I keep getting an error when ever I click on wcmail .
"Error starting host domain thread. See wcmail*.log file"
Has anybody ever seen this. Any help would be appreciated.

Bill

--- Platinum Xpress/Win/WINServer v3.1
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)

Date: Fri, 05 Oct 2012 17:44:53 -0400
From: rgorkov
To: MICHAEL PURDY
Subject: Re: wcmail error
Newsgroups: win.server.program
Message-ID: <1349473493.32.1349414775@winserver.com>
References: <1349414775.32.1349405930@winserver.com>
X-WcMsg-Attr: Rcvd
X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
Lines: 87

thanks Mike.

got the issue resolved.

under mail configuration the HOSTS section had an empty first record and
then my domain information on the second line. After removing the empty
line I was able to start up wcmail.

thanks again



On 10/5/2012 1:26 AM, MICHAEL PURDY wrote to rgorkov:

The same error may or may not mean the same root cause.

I would recommend you:

a) Post your log snippet showing the lines before and after the error

message

b) Post the associated wcMail.log entries (if any)
c) Indicate whether you are processing just ordinary email or email + UUCP/Newsgroup

Things to check and try:

a) Run wcRepair
b) Run a chkdsk /f
c) Make sure your OS R+W Permissions to directories etc are correct
d) Temporarily disable any Anti-Virus Programs (especially Grisofts AVG)
e) Temporarily disable any third party DyDNS / No IP Software clients

Most importantly:

f) Take a close look at your

wcCONFIG -> Mail Server -> Primary Domain - DefaultHost

config. Pay particular attention to the domain name and Spool path
settings especially whether or not the specified SPOOL path is accessible.

In short the more log / info you can provide to Hector the better the
chance he will be able to assist you.

Mike

On 10/4/2012 10:58 PM, rgorkov wrote to WILLIAM CHANEY:

I am having the same error message...

any help?

On 4/9/2010 11:19 AM, WILLIAM CHANEY wrote to WILLIAM CHANEY:

Here's the wcmail log file.

20100409 11:16:57 (MAIN) Starting wcMail v6.3.453.3
20100409 11:16:57 (MAIN) (c) copyright 1998-2010 by Santronics

Software Inc.

20100409 11:16:57 (MAIN) Wildcat! Server: WILLIAM-PC
20100409 11:16:57 (MAIN) wcMail Computer: WILLIAM-PC
20100409 11:16:57 (MAIN) - Import HTML Email : YES
20100409 11:16:57 (MAIN) # Starting Mail Import Processors
20100409 11:16:59 (MAIN) Error starting host domain thread. See

wcmail*.log

file

"WILLIAM CHANEY" wrote in message

news:1270793697.32.0@winserver.com...

I keep getting an error when ever I click on wcmail .
"Error starting host domain thread. See wcmail*.log file"
Has anybody ever seen this. Any help would be appreciated.

Bill

--- Platinum Xpress/Win/WINServer v3.1
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)