Hello All!

still not working, one difference between working version and the two non working ones I found is that the working version was compiled perl=0 hptzip=0 and the two non working versions were compiled =1 on both?

Regards,

Rick

--- GoldED+/LNX 1.1.5-b20180707
* Origin: Awesome Net- Oregon FTN Hub - www.awesomenet.us (1:105/81)

Hello All!

still not working, one difference between working version and the two non working ones I found is that the working version was compiled perl=0 hptzip=0 and the two non working versions were compiled =1 on both?

Where are you building husky?

I normally run slackware and have no issues. Same on Debian and Archlinux.

I spun up a Gentoo system recently for old times sake. It gave me a few FTBFS issues including husky, so I let it go.

--- BBBS/Li6 v4.10 Toy-6
* Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)

Greetings All!

I realized I didnt share what it is happening here is my hpt config as it pertains to nodelists etc.

#NODELISTS
nodelist NODELIST
nodelistdir \ftn\nodelist
FullUpdate \ftn\filebase\fido\nodelist\nodelist
DiffUpdate \ftn\filebase\fido\nodediff\nodediff
Fidouserlist FIDOUSER.LST
NodelistFormat Standard

Here is a piece of nltools.log after running nlupd

---------- Wed 21 Dec 2022, nlupdate/os2-emx 1.9 2022-02-11

P 08:21:30 Scan directory \ftn\filebase\fido\nodelist\ for nodelist
a 08:21:30 Found: NODELIST.Z01
a 08:21:30 Found: NODELIST.Z08
a 08:21:30 Found: NODELIST.Z15
a 08:21:30 Found: NODELIST.Z17
a 08:21:30 Found: NODELIST.Z22
a 08:21:30 Found: NODELIST.Z24
a 08:21:30 Found: NODELIST.Z29

list is longer but it finds them all....


08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z66
08:21:31 try_full_update()
08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z73
08:21:31 try_full_update()
08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z80
08:21:31 try_full_update()
08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z87
08:21:31 try_full_update()
08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z94
08:21:31 try_full_update()
08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
08:21:31 \ftn\nodelist\NODELIST.231 is more than two weeks old, but still no 08:21:31 ../src/nlupdate.c::process() done
08:21:31 End

Executing 'unzip -j -Loqq \ftn\filebase\fido\nodelist\NODELIST.Z38
Unpacker returned exit code '9'
Uncompress failed
Uncomressed filename: (null)


----
Regards,


Rick Smith (Nitro)

... TAGLINES.BBS Taglines About BBSing
--- GoldED+/OS2 1.1.52220220504
* Origin: ----> OS/2 test system (1:105/85)

Hello Rick,

Executing 'unzip -j -Loqq \ftn\filebase\fido\nodelist\NODELIST.Z38 Unpacker returned exit code '9'
Uncompress failed
Uncomressed filename: (null)

It looks like unzip failed for some reason, maybe it couldn't find your nodelist. Is it installed?

Once you have an uncompressed nodelist in your nodelist directory you can run "ulc" to create/update your fidouser.lst

Ttyl :-),
Al

... @/home/alan/mmail/taglines
--- GoldED+/LNX 1.1.5-b20220504
* Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757.2)

Hi Rick,

On 2022-12-21 08:22:16, you wrote to All:

Executing 'unzip -j -Loqq \ftn\filebase\fido\nodelist\NODELIST.Z38

^
I don't know if this is relevant, but I only see an opening ' no closing one...

Unpacker returned exit code '9'
Uncompress failed
Uncomressed filename: (null)

^^- Does it really say that?

Anyway, exit code 9 in the linux unzip is:

9 the specified zipfiles were not found.

Have you tried it without the -L ?
And maybe loose the qq and add a v while you are still trying to find out what the problem is...


Bye, Wilfred.

--- FMail-lnx64 2.1.0.18-B20170815
* Origin: FMail development HQ (2:280/464)

Hello Rick!

Wednesday December 21 2022 08:22, you wrote to All:

Might not be it but remove the '-Logg' from the command line.

Here with unzip (Info-ZIP 6.1c25-Beta), -L does not exist, nor with zip (v3.0).

Vince

Greetings All!

I realized I didnt share what it is happening here is my hpt config as
it pertains to nodelists etc.

#NODELISTS
nodelist NODELIST
nodelistdir \ftn\nodelist
FullUpdate \ftn\filebase\fido\nodelist\nodelist
DiffUpdate \ftn\filebase\fido\nodediff\nodediff
Fidouserlist FIDOUSER.LST
NodelistFormat Standard

Here is a piece of nltools.log after running nlupd

---------- Wed 21 Dec 2022, nlupdate/os2-emx 1.9 2022-02-11

P 08:21:30 Scan directory \ftn\filebase\fido\nodelist\ for nodelist
a 08:21:30 Found: NODELIST.Z01
a 08:21:30 Found: NODELIST.Z08
a 08:21:30 Found: NODELIST.Z15
a 08:21:30 Found: NODELIST.Z17
a 08:21:30 Found: NODELIST.Z22
a 08:21:30 Found: NODELIST.Z24
a 08:21:30 Found: NODELIST.Z29

list is longer but it finds them all....

08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z66
08:21:31 try_full_update()
08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z73
08:21:31 try_full_update()
08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z80
08:21:31 try_full_update()
08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z87
08:21:31 try_full_update()
08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z94
08:21:31 try_full_update()
08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
08:21:31 \ftn\nodelist\NODELIST.231 is more than two weeks old, but
still no
08:21:31 ../src/nlupdate.c::process() done
08:21:31 End

Executing 'unzip -j -Loqq \ftn\filebase\fido\nodelist\NODELIST.Z38
Unpacker returned exit code '9'
Uncompress failed
Uncomressed filename: (null)

----
Regards,

Rick Smith (Nitro)

... TAGLINES.BBS Taglines About BBSing

Vincent

--- Mageia Linux v8 X64/Mbse v1.0.8/GoldED+/LNX 1.1.5-b20180707
* Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)

22 Dec 22 00:31, Vincent Coen wrote to Rick Smith:

Here with unzip (Info-ZIP 6.1c25-Beta), -L does not exist, nor with zip (v3.0).

It is there in 6.00.

'man unzip':

=== Cut ===

-L convert to lowercase any filename originating on an uppercase-
only operating system or file system. (This was unzip's default
behavior in releases prior to 5.11; the new default behavior is
identical to the old behavior with the -U option, which is now
obsolete and will be removed in a future release.) Depending on
the archiver, files archived under single-case file systems
(VMS, old MS-DOS FAT, etc.) may be stored as all-uppercase
names; this can be ugly or inconvenient when extracting to a
case-preserving file system such as OS/2 HPFS or a case-sensi-
tive one such as under Unix. By default unzip lists and ex-
tracts such filenames exactly as they're stored (excepting trun-
cation, conversion of unsupported characters, etc.); this option
causes the names of all files from certain systems to be con-
verted to lowercase. The -LL option forces conversion of every
filename to lowercase, regardless of the originating file sys-
tem.
=== Cut ===

'Tommi

--- hpt/os2-wc 1.9 2022-12-17
* Origin: rbb.fidonet.fi (2:221/360)

Hi Wilfred.

21 Dec 22 19:31, you wrote to Rick Smith:

Unpacker returned exit code '9'
Uncompress failed
Uncomressed filename: (null)

^^- Does it really say that?

tommi@kco:~/husky$ grep -r Uncomressed *
nltools/src/nlupdate.c: w_log( LL_FILENAME, "Uncomressed filename: %s", ufn );

Yes. :)

'Tommi

--- GoldED+/LNX 1.1.5-b20220409
* Origin: Linux 5.15.76-v7+ armv7l (2:221/360)

Hello Tommi,

Friday December 23 2022, Tommi Koivula wrote to Wilfred van Velzen:

Unpacker returned exit code '9'
Uncompress failed
Uncomressed filename: (null)

^^- Does it really say that?

tommi@kco:~/husky$ grep -r Uncomressed *
nltools/src/nlupdate.c: w_log( LL_FILENAME, "Uncomressed filename:
%s", ufn );

Yes. :)

Fixed.

Michael

... node (at) f1042 (dot) ru
--- GoldED+/LNX 1.1.5-b20180707
* Origin: Moscow, Russia (2:5020/1042)

Hello Wilfred!

Wednesday December 21 2022 19:31, you wrote to me:

* Forwarded from area 'FIDOSOFT.HUSKY'
Hi Rick,

On 2022-12-21 08:22:16, you wrote to All:

Executing 'unzip -j -Loqq
\ftn\filebase\fido\nodelist\NODELIST.Z38

^
I don't know if this is relevant, but I only see an opening ' no
closing one...

Unpacker returned exit code '9'
Uncompress failed
Uncomressed filename: (null)

Have you tried it without the -L ?
And maybe loose the qq and add a v while you are still trying to find
out what the problem is...

I tried as you suggested and it works as it should now, thank you kindly.

Regards,

Rick

... BBSing is irrelevant. You will be assimilated. --Sysop of Borg
--- GoldED+/LNX 1.1.5-b20220504
* Origin: Awesome Net- Oregon FTN Hub - www.awesomenet.us (1:105/81)

Hello Alan!

03 Dec 2022 18:01, Alan Ianson wrote to Rick Smith:

Hello All!

still not working, one difference between working version and the two
non working ones I found is that the working version was compiled perl=0
hptzip=0 and the two non working versions were compiled =1 on both?

Where are you building husky?

I normally run slackware and have no issues. Same on Debian and Archlinux.

I spun up a Gentoo system recently for old times sake. It gave me a
few FTBFS issues including husky, so I let it go.

what is this ?

i have husky ebuilds for cvs version of husky, basicly i need to migrade ebuilds to git, just not done aslong i have cvs version stable, but wait till its crashes is to late aswell :)

if you know gentoo you know where to find fidonet overlay in eselect or layman, and note master is in rsync, but mirror is in git, where all my ebuilds is qa tested bad or good :)

google fidonet overlay


Regards Benny

... too late to die young :)

--- Msged/LNX 6.1.2 (Linux/6.1.11-gentoo-dist (x86_64))
* Origin: gopher://fido.junc.eu/ (2:230/0)

I spun up a Gentoo system recently for old times sake. It gave me a
few FTBFS issues including husky, so I let it go.

what is this ?

FTBFS?

Fails to build from source.

i have husky ebuilds for cvs version of husky, basicly i need to migrade ebuilds to git, just not done aslong i have cvs version stable, but wait till its crashes is to late aswell :)

I grab the husky source with git on github when I need it.

https://github.com/huskyproject

if you know gentoo you know where to find fidonet overlay in eselect or layman and note master is in rsync, but mirror is in git, where all my ebuilds is qa tested bad or good :)

I don't know gentoo that well but when I get a chance I'll look that up.

google fidonet overlay

Do you have an ebuild for golded? That is one I tried on gentoo but it fails to build from source. I think it just needs a change in the makefile for gentoo perhaps, but I couldn't find a way to build it successfully.

--- BBBS/Li6 v4.10 Toy-6
* Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)