• Who is right?

    From Ozz Nixon@1:275/362 to All on Tuesday, February 12, 2019 13:49:59
    Hello everybody.

    In another network my uplink is 21:1/100 and I am 21:1/144.

    My mailer is expected 00010064.flo however FMail generated 01130064.flo

    I double checked everything in FMail, and could not see a wrong address anywhere. This is my first attempt to start adding other networks to FMail 2.0

    Thanks!

    PS. 00010064.flo worked with FastEcho 1.46 for outbound to FSXNET.

    Ozz

    --- FMail-W32 2.0.1.4
    * Origin: Richmond VA (RVA) Fidonet Support (1:275/362)
  • From Wilfred van Velzen@2:280/464 to Ozz Nixon on Tuesday, February 12, 2019 21:33:56
    Hi Ozz,

    On 2019-02-12 13:49:59, you wrote to All:

    In another network my uplink is 21:1/100 and I am 21:1/144.

    My mailer is expected 00010064.flo however FMail generated 01130064.flo

    I double checked everything in FMail, and could not see a wrong address anywhere. This is my first attempt to start adding other networks to FMail 2.0

    113/64 hex => 275/100 dec. That's Carol's node in fidonet, your host. So I think you are mixing up some things?

    Bye, Wilfred.

    --- FMail-lnx64 2.1.0.18-B20170815
    * Origin: FMail development HQ (2:280/464)
  • From Ozz Nixon@1:275/362 to Wilfred van Velzen on Thursday, February 14, 2019 10:43:03
    Hello Wilfred.

    12 Feb 19 21:33, you wrote to me:

    Hi Ozz,

    On 2019-02-12 13:49:59, you wrote to All:

    In another network my uplink is 21:1/100 and I am 21:1/144.

    My mailer is expected 00010064.flo however FMail generated
    01130064.flo

    113/64 hex => 275/100 dec. That's Carol's node in fidonet, your host.
    So I think you are mixing up some things?

    Problem is the packet was destined to 21:1/100 not 1:275/100 - thus, my mailer was scanning for 00010064.FLO - but FMAIL made a 01130064.FLO, this is my confusion - I checked "Node Manager", not GROUP A which is Carol, it is GROUP B.

    The only thing I see I did wrong was System is 21:1/100, but VIA system, I had 21:1/144 (me) and Use AKA was AUTO ... it is now 21:1/100, 21:1/100 and 21:1/144 ... going to test again (always helps to document the issue) ;-)


    Ozz

    --- FMail-W32 2.0.1.4
    * Origin: Richmond VA (RVA) Fidonet Support (1:275/362)
  • From Ozz Nixon@1:275/362 to Ozz Nixon on Thursday, February 14, 2019 10:50:37
    Hello Ozz.

    14 Feb 19 10:43, I wrote to Wilfred van Velzen:


    The only thing I see I did wrong was System is 21:1/100, but VIA
    system, I had 21:1/144 (me) and Use AKA was AUTO ... it is now
    21:1/100, 21:1/100 and 21:1/144 ... going to test again (always helps
    to document the issue) ;-)

    That was it:

    Create C:\BINKPDOS\OUT.015\00010064.flo
    Sending new mail from 21:1/144 to 21:1/100


    Ozz

    --- FMail-W32 2.0.1.4
    * Origin: Richmond VA (RVA) Fidonet Support (1:275/362)