• Talsiman .49Dev

    From Vorlon@21:1/195 to Apam on Sunday, December 10, 2023 16:14:22

    Hello Apam!

    You will see a test post from me in fsx_tst from my Amiga Linux m68k install.. The message contains no origin line...
    The source was pulled down via git last might, and compiled using your example from the
    install-v0.59.sh file..

    === compile.sh ===
    #!/bin/bash -e

    git clone https://gitlab.com/apamment/talisman.git

    cd ../build/servo
    cmake ../../source/talisman/Servo
    make
    cd ../../build/talisman
    cmake ../../source/talisman/Talisman
    make
    cd ../../build/toolbelt
    cmake ../../source/talisman/Toolbelt
    make
    cd ../../build/postie
    cmake ../../source/talisman/Postie
    make
    cd ../../build/qwkie
    cmake ../../source/talisman/Qwkie
    make
    cd ../../build/falcon
    cmake ../../source/talisman/Falcon
    make
    cd ../../build/binki
    cmake ../../source/talisman/Binki
    make
    cd ../../build/gofer
    cmake ../../source/talisman/Gofer
    make
    cd ../../
    echo -e "Done.. run ./servo to start the BBS.."

    === compile ===

    === postie ===
    [postie]
    inbound = "ftn/in"
    protinbound = "ftn/in_sec"
    outbound = "ftn/out"
    packetdir = "ftn/packets"
    dupebase = "dupes"

    [[address]]
    aka = "21:1/195.1"

    [[link]]
    aka = "21:1/195"
    ouraka = "21:1/195.1"
    archiver = ""

    [[route]]
    aka = "21:1/195"
    pattern = "21:*"

    [[area]]
    aka = "21:1/195.1"
    file = "fsx/tst"
    tag = "FSX_TST"
    links = "21:1/195"

    [[area]]
    aka = "21:1/195.1"
    file = "fsx/gen"
    tag = "FSX_GEN"
    links = "21:1/195"

    [[netarea]]
    aka = "21:1/195.1"
    file = "fsx/netmail"

    === postie ===

    === msgconf ===
    [[messageconf]]
    name = "Local"
    config = "mb_local"
    sec_level = 10

    [[messageconf]]
    name = "FSX Net"
    config = "mb_fsx"
    sec_level = 10
    tagline = "Vorlon Empire: Sector 550"

    === msgconf ===

    === mb_fsx ===
    [[messagearea]]
    name = "General Discussion"
    file = "fsx/gen"
    read_sec_level = 10
    write_sec_level = 10
    qwk_base_no = 200

    [[messagearea]]
    name = "Test Posts"
    file = "fsx/tst"
    read_sec_level = 10
    write_sec_level = 10
    qwk_base_no = 201

    === mb_fsx ===





    Vorlon


    --- GoldED+/LNX 1.1.5-b20231021
    * Origin: Dragon's Lair ---:- dragon.vk3heg.net -:--- Prt: 6800 (21:1/195)
  • From apam@21:1/182 to Vorlon on Sunday, December 10, 2023 15:49:21
    You will see a test post from me in fsx_tst from my Amiga Linux m68k install..
    The message contains no origin line...

    You need to add an aka line in each of your echomail bases, otherwise
    talisman thinks it's a local base and wont put an origin line on it

    https://talismanbbs.com/docs/mbconfxtoml/

    Andrew


    --- Talisman v0.49-dev (FreeBSD/amd64)
    * Origin: Smuggler's Cove - scove.talismanbbs.com:2323 (21:1/182)
  • From vorlon@21:1/195.1 to apam on Sunday, December 10, 2023 17:18:26
    Hi apam,

    You will see a test post from me in fsx_tst from my Amiga Linux
    m68k install..
    The message contains no origin line...

    You need to add an aka line in each of your echomail bases, otherwise talisman thinks it's a local base and wont put an origin line on it

    Thanks, that'll teach me to delete everything six months ago and now have
    to start from scratch..

    Can you clear up the next issue.

    binki comlains about a path statement, being missing. After looking at
    the docs on the website I was missing the "outbox" statement.

    Should that be to the dir I have listed or another one. Binkd on the hub
    system complains about receiving the packet twice (No compression is
    being used).


    === binki.toml ===
    [binki]
    inbound = "ftn/in"
    secure_inbound = "ftn/in_sec"
    outbound = "ftn/out"
    default_zone = 21
    semaphore = "data/mailin.sem"

    [[address]]
    address = "21:1/195.1"
    domain = "fsxnet"

    [[link]]
    domain = "fsxnet"
    address = "21:1/195"
    password = "xxxx"
    cram-md5 = true
    host = "ftn.vk3heg.net"
    port = 24554
    outbox = "ftn/packets/21_1_195_0"
    ===




    --- Talisman v0.49-dev (Linux/m68k)
    * Origin: Vorlon Empire: Sector 550 (21:1/195.1)
  • From apam@21:1/182 to vorlon on Sunday, December 10, 2023 17:20:26
    binki comlains about a path statement, being missing. After looking at
    the docs on the website I was missing the "outbox" statement.

    That's a filebox for the node, so just point it to an empty directory and anything you put in will be sent to the node.

    Andrew


    --- Talisman v0.49-dev (FreeBSD/amd64)
    * Origin: Smuggler's Cove - scove.talismanbbs.com:2323 (21:1/182)
  • From vorlon@21:1/195.1 to apam on Monday, December 11, 2023 21:11:19
    Hi apam,

    binki comlains about a path statement, being missing. After looking
    at the docs on the website I was missing the "outbox" statement.

    That's a filebox for the node, so just point it to an empty directory
    and anything you put in will be sent to the node.

    Yeah it is.. I figures that out after sending the message (Always the
    way)..



    --- Talisman v0.49-dev (Linux/m68k)
    * Origin: Vorlon Empire: Sector 550 (21:1/195.1)