• SSH issue

    From Cozmo@21:3/135 to All on Tuesday, August 29, 2023 17:59:05
    I'm using Mystic v1.12 A47 compiled 2021/12/25 and windows 7 32 bit and I setup SSH using cryptlib. I have an issue when I logon on to the BBS using SSH. When I go to play a game which is in the "Game Room" MPL mod by Black Panther and try to play a Doorparty game I will get disconnected. Here is a snippet from the node log:

    2023.08.29 07:48:00 Executing: c:\mystic\doorparty\lu_dp.bat 1 Cozmo lord 2023.08.29 07:48:05 Execution complete: 0
    2023.08.29 07:48:05 RCS Game Room: Reading rcsrpg1.ini file
    2023.08.29 07:48:05 Flush error Not defined (-42) WSAECONNRESET: Connection was reset by the remote host executing a close
    2023.08.29 07:48:05 Write error (Not defined (-42) WSAECONNRESET: Connection was reset by the remote host executing a close)
    2023.08.29 07:48:05 Read error 0-Not defined (-42) WSAECONNRESET: Connection was reset by the remote host executing a close
    2023.08.29 07:48:05 User dropped connection
    2023.08.29 07:48:05 Shutting down

    |02-=|10Cozmo|02=-

    ... It said "insert disk #3", but only two will fit...

    --- Mystic BBS v1.12 A47 2021/12/25 (Windows/32)
    * Origin: Lunatics Unleashed BBS (21:3/135)
  • From esc@21:4/173 to Cozmo on Tuesday, August 29, 2023 22:39:37
    I'm using Mystic v1.12 A47 compiled 2021/12/25 and windows 7 32 bit and
    I setup SSH using cryptlib. I have an issue when I logon on to the BBS using SSH. When I go to play a game which is in the "Game Room" MPL mod
    by Black Panther and try to play a Doorparty game I will get
    disconnected. Here is a snippet from the node log:

    I think for ssh this is a known issue. The way around it is to stand up some other mystic server by itself to answer ssh and then internally telnet to the real BBS.

    This /may/ have been fixed or addressed at some point, might be worth checking out the changelogs, a47 is pretty outdated at this point.

    --- Mystic BBS v1.12 A49 2023/02/26 (Linux/64)
    * Origin: m O N T E R E Y b B S . c O M (21:4/173)
  • From Cozmo@21:3/135 to esc on Wednesday, August 30, 2023 07:45:51
    I think for ssh this is a known issue. The way around it is to stand up some other mystic server by itself to answer ssh and then internally telnet to the real BBS.

    This /may/ have been fixed or addressed at some point, might be worth checking out the changelogs, a47 is pretty outdated at this point.

    I most likely will update to a48 and see if that works. Rather not go through setting up a server for that purpose. I would like to have SSH but it's not that important to me to have it.

    Appreciate the help.

    |02-=|10Cozmo|02=-

    ... Oxymoron: Race walking

    --- Mystic BBS v1.12 A47 2021/12/25 (Windows/32)
    * Origin: Lunatics Unleashed BBS (21:3/135)
  • From Cozmo@21:3/135 to esc on Wednesday, August 30, 2023 18:36:12
    I think for ssh this is a known issue. The way around it is to stand up some other mystic server by itself to answer ssh and then internally telnet to the real BBS.

    This /may/ have been fixed or addressed at some point, might be worth checking out the changelogs, a47 is pretty outdated at this point.

    Updated to a48 but no luck with the SSH Problem.
    I guess I kust won't use SSH if I'm have that many problems.

    Thanks

    |02-=|10Cozmo|02=-

    ... BREAKFAST.COM Halted... Cereal port not responding.

    --- Mystic BBS v1.12 A48 (Windows/32)
    * Origin: Lunatics Unleashed BBS (21:3/135)
  • From Bucko@21:4/131 to Cozmo on Wednesday, August 30, 2023 19:14:55
    On 30 Aug 2023, Cozmo said the following...


    Updated to a48 but no luck with the SSH Problem.
    I guess I kust won't use SSH if I'm have that many problems.


    I know you have probably been asked this before, but what version of cryptlib are you running? Make sure you are running 3.4.5, SSH issues with cryptlib are usually because of it being the wrong version.. When I moved over to Linux I had issues because I couldn't assemble 3.4.5 so I tried pre-assembled versions and I assembled 3.4.6 and had SSH issues in addition to it not working with the GMAIL email send routines.. Grab the 3.4.5 off the wiki and just replace that along with removing the ssl.cert file that will be found in the c:\mystic\data directory. That all should solve your problems..

    Al

    ... Operator, give me the number for 911

    --- Mystic BBS v1.12 A48 (Linux/64)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Cozmo@21:3/135 to Bucko on Wednesday, August 30, 2023 20:47:24
    I know you have probably been asked this before, but what version of cryptlib are you running? Make sure you are running 3.4.5, SSH issues
    with cryptlib are usually because of it being the wrong version.. When I moved over to Linux I had issues because I couldn't assemble 3.4.5 so I tried pre-assembled versions and I assembled 3.4.6 and had SSH issues in addition to it not working with the GMAIL email send routines.. Grab the 3.4.5 off the wiki and just replace that along with removing the
    ssl.cert file that will be found in the c:\mystic\data directory. That
    all should solve your problems..

    I'm using 3.4.5 I also tried 3.4.6 just for the hell of it. I also deleted the ssl.cert but no luck.

    |02-=|10Cozmo|02=-

    ... Users come in two types: Those who have lost data, and those who will.

    --- Mystic BBS v1.12 A48 (Windows/32)
    * Origin: Lunatics Unleashed BBS (21:3/135)
  • From Bucko@21:4/131 to Cozmo on Thursday, August 31, 2023 20:29:54
    On 30 Aug 2023, Cozmo said the following...


    I'm using 3.4.5 I also tried 3.4.6 just for the hell of it. I also
    deleted the ssl.cert but no luck.


    That is so weird.. Hopefully, g00r00 gets back soon to maybe shed some light on the matter...

    ... A Skydiver is taken by the gravity of his situation.

    --- Mystic BBS v1.12 A48 (Linux/64)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)