Is there anyway to tell Squish not to route netmails, ie not touch them at all.


-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
--- timEd/Linux 1.11.b1
* Origin: Ireland Main and Best Fidonet (2:263/950)

Hi Sean,

Is there anyway to tell Squish not to route netmails,
ie not touch them at all.

Have a real close read of the Squish instructions, the commandline parameters are VERY subtle. In particualr note the SQUASH option -

SQUASH For a BinkleyTerm system, the SQUASH command packs
messages from the NetMail areas, scans the outbound
areas, performs mail routing, and compresses packets.

For a FrontDoor-style system, the SQUASH command
compresses packets, scans the NetMail area, creates
ARCmail attach messages, and optionally kills any
orphaned archives.

If the SQUASH command is specified on the same command
line as IN and OUT, the single pass MaxMsgs mode can
also be used to limit outbound packet sizes.

In a nutshell, if you are runing FD style outbound, then you can't so this, however if you are runing BSO, then you can. Just use IN and OUT but don't include the SQUASH option and with BSO will ignore Netmail FOR THAT PASS. However note that to use SQUISH to PACK outbound, you need SQUASH, which implies a Netmail area pass.

Sometimes it just takes the right combination of multiple passes to achieve the
result you desire.

The other sneaky way to do this is to use multiple Netmail areas and make sure SQUISH only sees an empty one or the one you don't care if it touches.

Cheers...............pk.


--- Maximus/2 3.01
* Origin: Another Good Point About OS/2 (3:772/1.10)

Sun 2003-12-07 10:00, Peter Knapper (3:772/1.10) wrote to Sean Rima:

Hi Sean,

Is there anyway to tell Squish not to route netmails,
ie not touch them at all.

Have a real close read of the Squish instructions, the commandline parameters are VERY subtle. In particualr note the SQUASH option -

SQUASH For a BinkleyTerm system, the SQUASH command packs
messages from the NetMail areas, scans the outbound
areas, performs mail routing, and compresses packets.

For a FrontDoor-style system, the SQUASH command
compresses packets, scans the NetMail area, creates
ARCmail attach messages, and optionally kills any orphaned archives.

If the SQUASH command is specified on the same command
line as IN and OUT, the single pass MaxMsgs mode can
also be used to limit outbound packet sizes.

In a nutshell, if you are runing FD style outbound, then you can't
so this, however if you are runing BSO, then you can. Just use IN
and OUT but don't include the SQUASH option and with BSO will
ignore Netmail FOR THAT PASS. However note that to use SQUISH to
PACK outbound, you need SQUASH, which implies a Netmail area pass.

I tired that but that leaves OUT files which are big compared to general zipped
files :)(

-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
--- timEd/Linux 1.11.b1
* Origin: Ireland Main and Best Fidonet (2:263/950)

Hi Sean,

In a nutshell, if you are runing FD style outbound, then you can't
do this, however if you are runing BSO, then you can. Just use IN
and OUT but don't include the SQUASH option and with BSO will
ignore Netmail FOR THAT PASS. However note that to use SQUISH to
PACK outbound, you need SQUASH, which implies a Netmail area pass.

I tired that but that leaves OUT files which are big
compared to general zipped files :)(

Thats what SQUASH sorts out..........;-)

Why do you wish to leave the Netmails alone, do you need some other S/W to process them first?

Cheers................pk.


--- Maximus/2 3.01
* Origin: Another Good Point About OS/2 (3:772/1.10)

sean rima wrote to All about ''Not routing netmails'':

Is there anyway to tell Squish not to route netmails, ie not touch
them at all.

squish -o out squash

Bo

--- timEd/Linux 1.11.b1
* Origin: (=- The Night Express, Roennede Dk -=) (2:236/100)

Hello, sean...

Dec 06, 2003 at 12:45, sean rima wrote to All:

Is there anyway to tell Squish not to route netmails, ie not touch
them at all.

Run Squish with the -o switch, if you are running Bink-style.

Regards,

Jerry Schwartz

mailto:jerryschwartz@comfortable.com
http://www.writebynight.com

--- Msged/NT 6.0.1
* Origin: Write by Night (1:142/928)

Mon 2003-12-08 17:55, Peter Knapper (3:772/1.10) wrote to Sean Rima:

Hi Sean,

In a nutshell, if you are runing FD style outbound, then you can't
do this, however if you are runing BSO, then you can. Just use IN
and OUT but don't include the SQUASH option and with BSO will
ignore Netmail FOR THAT PASS. However note that to use SQUISH to
PACK outbound, you need SQUASH, which implies a Netmail area pass.

I tired that but that leaves OUT files which are big
compared to general zipped files :)(

Thats what SQUASH sorts out..........;-)

Why do you wish to leave the Netmails alone, do you need some other
S/W to process them first?

I want the routing to be done by Ftrack or netmgr

-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
--- timEd/Linux 1.11.b1
* Origin: Ireland Main and Best Fidonet (2:263/950)

Tue 2003-12-09 14:18, Bo Simonsen (2:236/100) wrote to sean rima:

sean rima wrote to All about ''Not routing netmails'':

Is there anyway to tell Squish not to route netmails, ie not touch
them at all.

squish -o out squash

Thaanks will do that :)

-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
--- timEd/Linux 1.11.b1
* Origin: Ireland Main and Best Fidonet (2:263/950)

Tue 2003-12-09 14:18, Bo Simonsen (2:236/100) wrote to sean rima:

sean rima wrote to All about ''Not routing netmails'':

Is there anyway to tell Squish not to route netmails, ie not touch
them at all.

squish -o out squash

Not to get Ftrack working, although I may try iptrax

-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
--- timEd/Linux 1.11.b1
* Origin: Ireland Main and Best Fidonet (2:263/950)

Sat 2003-12-06 19:48, Jerry Schwartz (1:142/928) wrote to sean rima:

Hello, sean...

Dec 06, 2003 at 12:45, sean rima wrote to All:

Is there anyway to tell Squish not to route netmails, ie not touch
them at all.

Run Squish with the -o switch, if you are running Bink-style.

Many thanks



-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
--- timEd/Linux 1.11.b1
* Origin: Ireland Main and Best Fidonet (2:263/950)

* Reply to a message in CARBON_COPY.

sean rima wrote to Bo Simonsen about ''Not routing netmails'':

Note: Copied from TUB by WIMM 1.31

Tue 2003-12-09 14:18, Bo Simonsen (2:236/100) wrote to sean rima:

sean rima wrote to All about ''Not routing netmails'':

Is there anyway to tell Squish not to route netmails, ie not touch
them at all.

squish -o out squash

Thaanks will do that :)

I used it then I did use Netmgr for packing netmail. :-)

Bo

--- timEd/Linux 1.11.b1
* Origin: (=- The Night Express, Roennede Dk -=) (2:236/100)

* Reply to a message in CARBON_COPY.

sean rima wrote to Bo Simonsen about ''Not routing netmails'':

Note: Copied from TUB by WIMM 1.31

Is there anyway to tell Squish not to route netmails, ie not touch
them at all.

squish -o out squash

Not to get Ftrack working, although I may try iptrax

How about trying Netmgr? :-)

Bo

--- timEd/Linux 1.11.b1
* Origin: (=- The Night Express, Roennede Dk -=) (2:236/100)

* Reply to a message in WIMM.

Sat 2003-12-13 13:56, Bo Simonsen (2:236/100) wrote to sean rima:

Note: Copied from TUB by WIMM/UNIX 2.2

Is there anyway to tell Squish not to route netmails, ie not touch
them at all.

squish -o out squash

Thaanks will do that :)

I used it then I did use Netmgr for packing netmail. :-)

That bit I cannot work out as there is no example, Say for example how do I route netmails for 263/93 to 263/951

Sean

-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
--- timEd/Linux 1.11.b1
* Origin: Ireland Main and Best Fidonet (2:263/950)

* Reply to a message in WIMM.

Sat 2003-12-13 13:57, Bo Simonsen (2:236/100) wrote to sean rima:

Note: Copied from TUB by WIMM/UNIX 2.2

Is there anyway to tell Squish not to route netmails, ie not touch
them at all.

squish -o out squash

Not to get Ftrack working, although I may try iptrax

How about trying Netmgr? :-)

Cannot work it out :) See my last or first or whatever :)

-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
--- timEd/Linux 1.11.b1
* Origin: Ireland Main and Best Fidonet (2:263/950)

Hello sean.

12 Dec 03 14:23, you wrote to Bo Simonsen:

squish -o out squash

Not to get Ftrack working, although I may try iptrax

I use ftrack here and it works very well. No problems.

Make sure you get 3.1 from ftp://fido.thunderdome.ws/pub/mirror/ftrack

Though hpt will route mail flawlessly, the developers believe a tosser is for tossing echomail and a tracker is for routing netmail. I share that belief.

Matt

e-mail: matt [at] thunderdome.ws | icq: 16568532 | yahoo: mbedynek

---
* Origin: high speed feeds - http://fido.thunderdome.ws/ (1:106/1)

* Reply to a message in WIMM.

Sat 2003-12-13 20:36, Matt Bedynek (1:106/1) wrote to sean rima:

squish -o out squash

Not to get Ftrack working, although I may try iptrax

I use ftrack here and it works very well. No problems.

Make sure you get 3.1 from
ftp://fido.thunderdome.ws/pub/mirror/ftrack

Umm, I get it from ufm.kgb.ru but then I know the author :)

Though hpt will route mail flawlessly, the developers believe a
tosser is for tossing echomail and a tracker is for routing
netmail. I share that belief.

I use Squish but yes I believe this as well.

-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
TCOB1.net forums http://forums.tcob1.net
--- timEd/Linux 1.11.b1
* Origin: telnet://tcob1.no-ip.com 10023 1800-2300 (2:263/950)

Hello sean.

14 Dec 03 10:49, you wrote to me:

Make sure you get 3.1 from
ftp://fido.thunderdome.ws/pub/mirror/ftrack

Umm, I get it from ufm.kgb.ru but then I know the author :)

I have not been able to reach his site for months now.

Matt

e-mail: matt [at] thunderdome.ws | icq: 16568532 | yahoo: mbedynek

---
* Origin: high speed feeds - http://fido.thunderdome.ws/ (1:106/1)

* Reply to a message in WIMM.

Sun 2003-12-14 10:32, Matt Bedynek (1:106/1) wrote to sean rima:

Make sure you get 3.1 from
ftp://fido.thunderdome.ws/pub/mirror/ftrack

Umm, I get it from ufm.kgb.ru but then I know the author :)

I have not been able to reach his site for months now.

It does seem to be up and down but mainly down.

-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
TCOB1.net forums http://forums.tcob1.net
TCOB1.net telnet://tcob1.net 2000 for BBS or see Origin
--- timEd/Linux 1.11.b1
* Origin: telnet://tcob1.no-ip.com 10023 1800-2300 (2:263/950)

* Reply to a message in CARBON_COPY.


sean rima wrote to Bo Simonsen about ''Not routing netmails'':

Note: Copied from TUB by WIMM 1.31

Is there anyway to tell Squish not to route netmails, ie not touch
them at all.

squish -o out squash

Thaanks will do that :)

I used it then I did use Netmgr for packing netmail. :-)

That bit I cannot work out as there is no example, Say for example
how do I route netmails for 263/93 to 263/951

With Squish or Netmgr?

With netmgr I bet it would use:

Mask *, *, *, 2:263/93, *, *
Action PackMail @myaka 2:263/951..

Here is my Netmgr.cfg

=== Netmgr.cfg

home 2:236/100.0
address 2:236/1.0
address 110:300/17.0
address 111:7045/54.0
address 115:4501/14.0
address 618:700/0.0
address 618:700/1.0
address 618:700/10.0
address 618:700/11.0
address 618:1060/0.0

intlforce yes
origin NetMgr/Linux at The Night Express
log /home/ftn/log/netmgr.log
nodelist /home/ftn/spool/nl.d
outbound /home/ftn/spool/outbound

scandir $/home/ftn/spool/msgbase/netmail/netmail
Mask *, *, *, *, *, -@-s
Action Bounce @myaka, $/home/ftn/etc/bounced.tpl
Action Move $/home/ftn/spool/msgbase/netmail/netmail_bad

Mask *, *, Areafix, 2:236/100.*, *, *
Action Move $/home/ftn/spool/msgbase/netmail/netmail_robo

Mask *, *, *, *, *, -f
Action Move $/home/ftn/spool/msgbase/netmail/netmail_me

Mask *, *, *, *, *, *
Action Move $/home/ftn/spool/msgbase/netmail/netmail_out

Mask *, *, Echobot, 2:236/100.0, *, *
Action EchoMove 2:236/100.0 $/home/ftn/spool/msgbase/netmail/msgbase/squish/ne.info 2:236/100.0

scandir $/home/ftn/spool/msgbase/netmail/netmail_robo
Mask *, *, Areafix, *, *, *
Action RunExternal /home/ftn/bin/sqafix scan
Action Delete

Mask *, *, *, *, *, +l
Action Move $/home/ftn/spool/msgbase/netmail/netmail_out


scandir $/home/ftn/spool/msgbase/netmail/netmail_me
Mask *, *, *, *, *, +l
Action Move $/home/ftn/spool/msgbase/netmail/netmail_out

scandir $/home/ftn/spool/msgbase/netmail/netmail_out
Mask *, *, *, *, *, +s
Action Ignore

Mask *, *, *, *, *, +c
Action PackMail @myaka *

Mask *, *, *, 2:236/100.*, *, *
Action Rewrite *, *, *, *, *, +h
Action PackMail @myaka *

Mask *, *, *, 2:236/150.*, *, *
Mask *, *, *, 2:236/151.*, *, *
Mask *, *, *, 2:236/152.*, *, *
Mask *, *, *, 2:236/153.*, *, *
Action PackMail @myaka 2:236/150.0

Mask *, *, *, 2:236/*.*, *, *
Action PackMail @myaka 2:236/35.0

Mask *, *, *, 2:237/53.*, *, *
Mask *, *, *, 2:237/38.*, *, *
Action PackMail @myaka 2:237/53.0

Mask *, *, *, 1:*/*.*, *, *
Mask *, *, *, 2:*/*.*, *, *
Mask *, *, *, 3:*/*.*, *, *
Mask *, *, *, 4:*/*.*, *, *
Mask *, *, *, 5:*/*.*, *, *
Mask *, *, *, 6:*/*.*, *, *
Action PackMail @myaka 2:237/9.0

Mask *, *, *, 110:*/*.*, *, *
Action PackMail @myaka 110:300/1.0

Mask *, *, *, 111:*/*.*, *, *
Action PackMail @myaka 111:7045/1.0

Mask *, *, *, 115:*/*.*, *, *
Action PackMail @myaka 115:115/16.0

Mask *, *, *, 618:*/*.*, *, *
Action PackMail @myaka 618:200/0.0

=======

Bo

--- timEd/Linux 1.11.b1
* Origin: (=- The Night Express, Roennede Dk -=) (2:236/100)

* Reply to a message in CARBON_COPY.


sean rima wrote to Bo Simonsen about ''Not routing netmails'':

Note: Copied from TUB by WIMM 1.31

How about trying Netmgr? :-)

Cannot work it out :) See my last or first or whatever :)

Hmmm.. Okay...

Bo

--- timEd/Linux 1.11.b1
* Origin: (=- The Night Express, Roennede Dk -=) (2:236/100)

* Reply to a message in WIMM.

Sun 2003-12-14 16:13, Bo Simonsen (2:236/100) wrote to sean rima:

Note: Copied from TUB by WIMM/UNIX 2.2

* Reply to a message in CARBON_COPY.

sean rima wrote to Bo Simonsen about ''Not routing netmails'':

Note: Copied from TUB by WIMM 1.31

Is there anyway to tell Squish not to route netmails, ie not touch
them at all.

squish -o out squash

Thaanks will do that :)

I used it then I did use Netmgr for packing netmail. :-)

That bit I cannot work out as there is no example, Say for example
how do I route netmails for 263/93 to 263/951

With Squish or Netmgr?

With netmgr I bet it would use:

Mask *, *, *, 2:263/93, *, *
Action PackMail @myaka 2:263/951..

Here is my Netmgr.cfg

=== Netmgr.cfg

home 2:236/100.0
address 2:236/1.0
address 110:300/17.0
address 111:7045/54.0
address 115:4501/14.0
address 618:700/0.0
address 618:700/1.0
address 618:700/10.0
address 618:700/11.0
address 618:1060/0.0

intlforce yes
origin NetMgr/Linux at The Night Express
log /home/ftn/log/netmgr.log
nodelist /home/ftn/spool/nl.d
outbound /home/ftn/spool/outbound

scandir $/home/ftn/spool/msgbase/netmail/netmail
Mask *, *, *, *, *, -@-s
Action Bounce @myaka, $/home/ftn/etc/bounced.tpl
Action Move $/home/ftn/spool/msgbase/netmail/netmail_bad

Mask *, *, Areafix, 2:236/100.*, *, *
Action Move $/home/ftn/spool/msgbase/netmail/netmail_robo

Mask *, *, *, *, *, -f
Action Move $/home/ftn/spool/msgbase/netmail/netmail_me

Mask *, *, *, *, *, *
Action Move $/home/ftn/spool/msgbase/netmail/netmail_out

Mask *, *, Echobot, 2:236/100.0, *, *
Action EchoMove 2:236/100.0 $/home/ftn/spool/msgbase/netmail/msgbase/squish/ne.info 2:236/100.0

scandir $/home/ftn/spool/msgbase/netmail/netmail_robo
Mask *, *, Areafix, *, *, *
Action RunExternal /home/ftn/bin/sqafix scan
Action Delete

Mask *, *, *, *, *, +l
Action Move $/home/ftn/spool/msgbase/netmail/netmail_out

scandir $/home/ftn/spool/msgbase/netmail/netmail_me
Mask *, *, *, *, *, +l
Action Move $/home/ftn/spool/msgbase/netmail/netmail_out

scandir $/home/ftn/spool/msgbase/netmail/netmail_out
Mask *, *, *, *, *, +s
Action Ignore

Mask *, *, *, *, *, +c
Action PackMail @myaka *

Mask *, *, *, 2:236/100.*, *, *
Action Rewrite *, *, *, *, *, +h
Action PackMail @myaka *

Mask *, *, *, 2:236/150.*, *, *
Mask *, *, *, 2:236/151.*, *, *
Mask *, *, *, 2:236/152.*, *, *
Mask *, *, *, 2:236/153.*, *, *
Action PackMail @myaka 2:236/150.0

Mask *, *, *, 2:236/*.*, *, *
Action PackMail @myaka 2:236/35.0

Mask *, *, *, 2:237/53.*, *, *
Mask *, *, *, 2:237/38.*, *, *
Action PackMail @myaka 2:237/53.0

Mask *, *, *, 1:*/*.*, *, *
Mask *, *, *, 2:*/*.*, *, *
Mask *, *, *, 3:*/*.*, *, *
Mask *, *, *, 4:*/*.*, *, *
Mask *, *, *, 5:*/*.*, *, *
Mask *, *, *, 6:*/*.*, *, *
Action PackMail @myaka 2:237/9.0

Mask *, *, *, 110:*/*.*, *, *
Action PackMail @myaka 110:300/1.0

Mask *, *, *, 111:*/*.*, *, *
Action PackMail @myaka 111:7045/1.0

Mask *, *, *, 115:*/*.*, *, *
Action PackMail @myaka 115:115/16.0

Mask *, *, *, 618:*/*.*, *, *
Action PackMail @myaka 618:200/0.0

I could not see anything like this in the docs :)


-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
TCOB1.net forums http://forums.tcob1.net
TCOB1.net telnet://tcob1.net 2000 for BBS or see Origin
--- timEd/Linux 1.11.b1
* Origin: telnet://tcob1.no-ip.com 10023 1800-2300 (2:263/950)

* Reply to a message in WIMM.

Sun 2003-12-14 16:13, Bo Simonsen (2:236/100) wrote to sean rima:

Note: Copied from TUB by WIMM/UNIX 2.2

* Reply to a message in CARBON_COPY.

sean rima wrote to Bo Simonsen about ''Not routing netmails'':

Note: Copied from TUB by WIMM 1.31

How about trying Netmgr? :-)

Cannot work it out :) See my last or first or whatever :)

Hmmm.. Okay...

And you since answered it :)

-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
TCOB1.net forums http://forums.tcob1.net
TCOB1.net telnet://tcob1.net 2000 for BBS or see Origin
--- timEd/Linux 1.11.b1
* Origin: telnet://tcob1.no-ip.com 10023 1800-2300 (2:263/950)

* Reply to a message in CARBON_COPY.

Matt Bedynek wrote to Bo Simonsen about ''Not routing netmails'':

Note: Copied from TUB by WIMM 1.31

Not to get Ftrack working, although I may try iptrax

How about trying Netmgr? :-)

Are you crazy? ftrack blows it out of the water! :-)

And it's still maintained, and it compiles perfectly?

The answer is _no_. Netmgr is.

If somebody reports bugs in Netmgr, I'll correct them.

Bo

--- timEd/Linux 1.11.b1
* Origin: (=- The Night Express, Roennede Dk -=) (2:236/100)

* Reply to a message in CARBON_COPY.


sean rima wrote to Bo Simonsen about ''Not routing netmails'':

Note: Copied from TUB by WIMM 1.31

* Reply to a message in WIMM.

Is there anyway to tell Squish not to route netmails, ie not touch
them at all.

squish -o out squash

Thaanks will do that :)

I used it then I did use Netmgr for packing netmail. :-)

That bit I cannot work out as there is no example, Say for example
how do I route netmails for 263/93 to 263/951

With Squish or Netmgr?

With netmgr I bet it would use:

Mask *, *, *, 2:263/93, *, *
Action PackMail @myaka 2:263/951..

Here is my Netmgr.cfg

=== Netmgr.cfg

home 2:236/100.0
address 2:236/1.0
address 110:300/17.0
address 111:7045/54.0
address 115:4501/14.0
address 618:700/0.0
address 618:700/1.0
address 618:700/10.0
address 618:700/11.0
address 618:1060/0.0

intlforce yes
origin NetMgr/Linux at The Night Express
log /home/ftn/log/netmgr.log
nodelist /home/ftn/spool/nl.d
outbound /home/ftn/spool/outbound

scandir $/home/ftn/spool/msgbase/netmail/netmail
Mask *, *, *, *, *, -@-s
Action Bounce @myaka, $/home/ftn/etc/bounced.tpl
Action Move $/home/ftn/spool/msgbase/netmail/netmail_bad

Mask *, *, Areafix, 2:236/100.*, *, *
Action Move $/home/ftn/spool/msgbase/netmail/netmail_robo

Mask *, *, *, *, *, -f
Action Move $/home/ftn/spool/msgbase/netmail/netmail_me

Mask *, *, *, *, *, *
Action Move $/home/ftn/spool/msgbase/netmail/netmail_out

Mask *, *, Echobot, 2:236/100.0, *, *
Action EchoMove 2:236/100.0
$/home/ftn/spool/msgbase/netmail/msgbase/squish/ne.info 2:236/100.0

scandir $/home/ftn/spool/msgbase/netmail/netmail_robo
Mask *, *, Areafix, *, *, *
Action RunExternal /home/ftn/bin/sqafix scan
Action Delete

Mask *, *, *, *, *, +l
Action Move $/home/ftn/spool/msgbase/netmail/netmail_out

scandir $/home/ftn/spool/msgbase/netmail/netmail_me
Mask *, *, *, *, *, +l
Action Move $/home/ftn/spool/msgbase/netmail/netmail_out

scandir $/home/ftn/spool/msgbase/netmail/netmail_out
Mask *, *, *, *, *, +s
Action Ignore

Mask *, *, *, *, *, +c
Action PackMail @myaka *

Mask *, *, *, 2:236/100.*, *, *
Action Rewrite *, *, *, *, *, +h
Action PackMail @myaka *

Mask *, *, *, 2:236/150.*, *, *
Mask *, *, *, 2:236/151.*, *, *
Mask *, *, *, 2:236/152.*, *, *
Mask *, *, *, 2:236/153.*, *, *
Action PackMail @myaka 2:236/150.0

Mask *, *, *, 2:236/*.*, *, *
Action PackMail @myaka 2:236/35.0

Mask *, *, *, 2:237/53.*, *, *
Mask *, *, *, 2:237/38.*, *, *
Action PackMail @myaka 2:237/53.0

Mask *, *, *, 1:*/*.*, *, *
Mask *, *, *, 2:*/*.*, *, *
Mask *, *, *, 3:*/*.*, *, *
Mask *, *, *, 4:*/*.*, *, *
Mask *, *, *, 5:*/*.*, *, *
Mask *, *, *, 6:*/*.*, *, *
Action PackMail @myaka 2:237/9.0

Mask *, *, *, 110:*/*.*, *, *
Action PackMail @myaka 110:300/1.0

Mask *, *, *, 111:*/*.*, *, *
Action PackMail @myaka 111:7045/1.0

Mask *, *, *, 115:*/*.*, *, *
Action PackMail @myaka 115:115/16.0

Mask *, *, *, 618:*/*.*, *, *
Action PackMail @myaka 618:200/0.0

I could not see anything like this in the docs :)

No it's also homemade. :-) But all the actions is described in the docs.

Bo

--- timEd/Linux 1.11.b1
* Origin: (=- The Night Express, Roennede Dk -=) (2:236/100)

* Reply to a message in CARBON_COPY.


sean rima wrote to Bo Simonsen about ''Not routing netmails'':

Note: Copied from TUB by WIMM 1.31

sean rima wrote to Bo Simonsen about ''Not routing netmails'':

Note: Copied from TUB by WIMM 1.31

How about trying Netmgr? :-)

Cannot work it out :) See my last or first or whatever :)

Hmmm.. Okay...

And you since answered it :)

Ok, and you did solve the problem with my answer?

Bo

--- timEd/Linux 1.11.b1
* Origin: (=- The Night Express, Roennede Dk -=) (2:236/100)

* Reply to a message in WIMM.

Tue 2003-12-16 16:34, Bo Simonsen (2:236/100) wrote to sean rima:

Note: Copied from TUB by WIMM/UNIX 2.2

Action PackMail @myaka 618:200/0.0

I could not see anything like this in the docs :)

No it's also homemade. :-) But all the actions is described in the docs.

I will post my shortly once I have worked a couple of bits out :)

-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
TCOB1.net forums http://forums.tcob1.net
TCOB1.net telnet://tcob1.net 2000 for BBS or see Origin
--- timEd/Linux 1.11.b1
* Origin: telnet://tcob1.no-ip.com 10023 1800-2300 (2:263/950)

* Reply to a message in WIMM.

Tue 2003-12-16 16:35, Bo Simonsen (2:236/100) wrote to sean rima:

Note: Copied from TUB by WIMM/UNIX 2.2

* Reply to a message in CARBON_COPY.

sean rima wrote to Bo Simonsen about ''Not routing netmails'':

Note: Copied from TUB by WIMM 1.31

sean rima wrote to Bo Simonsen about ''Not routing netmails'':

Note: Copied from TUB by WIMM 1.31

How about trying Netmgr? :-)

Cannot work it out :) See my last or first or whatever :)

Hmmm.. Okay...

And you since answered it :)

Ok, and you did solve the problem with my answer?

Indeed I did :)

-- sean
TCOB1.net mailing lists http://mail.tcob1.net/mailman/listinfo
TCOB1.net forums http://forums.tcob1.net
TCOB1.net telnet://tcob1.net 2000 for BBS or see Origin
--- timEd/Linux 1.11.b1
* Origin: telnet://tcob1.no-ip.com 10023 1800-2300 (2:263/950)