• Routing Netmail

    From Gord Hannah@1:17/23 to All on Wednesday, February 21, 2007 21:18:16

    Hi All, hope you are having a nice day! :-)
    Written on: 21-Feb-2007 21:18

    I have forgotten how to get Squish to route Netmail through my uplink.
    here is my route.cfg:

    Route world 1:140/1

    What is needed in squish.cfg? I can post the file if needed.

    Hope this helps. Keep us posted.

    We are a fine board trying to make it better.

    http://www.pris.bc.ca/ghannah
    ghannah@pris.bc.ca
    Cheers!
    Gord Hannah
    -=Team OS/2=-

    --- Terminate 5.00/Pro*at Test and Support Site
    * Origin: Marsh BBS (c) Dawson Creek BC Canada (1:17/23)
  • From Bob Jones@1:343/41 to Gord Hannah on Wednesday, February 21, 2007 21:09:08
    Hi All, hope you are having a nice day! :-)
    Written on: 21-Feb-2007 21:18

    I have forgotten how to get Squish to route Netmail through my uplink. here is my route.cfg:

    Route world 1:140/1

    What is needed in squish.cfg? I can post the file if needed.

    Time to go back to the basic maximus / squish documentation..... Pull out the sample squish.cfg and look. I know you need to define the netmail area a location on disk. And I'm sure there are several other parameters, including your fido address, and any packet passwords, etc. From memory, 1:140/1 typically forces packet passwords......

    I don't have the time right now to dig the full details out....

    Take care....

    Bob Jones, 1:343/41


    --- Maximus/2 3.01
    * Origin: Top Hat 2 BBS (1:343/41)
  • From Peter Knapper@3:772/1.10 to Gord Hannah on Thursday, February 22, 2007 20:56:26
    Hi Gord,

    I have forgotten how to get Squish to route Netmail through my uplink. here is my route.cfg:

    Route world 1:140/1

    That should be all you need, provided all the other usual things are correct like YOUR Fidonet address, Netmail areas, etc...

    What is needed in squish.cfg? I can post the file if needed.

    Are you sure that SCHEDULE is being triggered?

    Cheers...............pk


    --- Maximus/2 3.01
    * Origin: Another Good Point About OS/2 (3:772/1.10)
  • From Gord Hannah@1:17/23 to Peter Knapper on Thursday, February 22, 2007 08:39:25

    Hi Peter, hope you are having a nice day! :-)

    22-Feb-07 20:56:26, Peter Knapper wrote to Gord Hannah
    Subject: Routing Netmail


    Are you sure that SCHEDULE is being triggered?

    Nope not being triggered. I posted my route.cfg in its entirety.

    Written on: 22-Feb-2007 08:39


    Hope this helps. Keep us posted.

    We are a fine board trying to make it better.

    http://www.pris.bc.ca/ghannah
    ghannah@pris.bc.ca
    Cheers!
    Gord Hannah
    -=Team OS/2=-

    --- Terminate 5.00/Pro*at Test and Support Site
    * Origin: Marsh BBS (c) Dawson Creek BC Canada (1:17/23)
  • From Mvan Le@1:343/41 to Gord Hannah on Thursday, February 22, 2007 08:39:56
    Hi All, hope you are having a nice day! :-)
    Written on: 21-Feb-2007 21:18

    I have forgotten how to get Squish to route Netmail through my uplink. here is my Route.Cfg:

    Route world 1:140/1

    Because I'm lazy and currently only deal with Fidonet, I use "Send Hold World" in route.cfg's global section and let my mailer do all the work.

    What is needed in squish.cfg? I can post the file if needed.

    You need to atleast define a NetArea in Squish.Cfg eg.:

    NetArea <tag> <path> [flags] [nodes]

    Then when you pack netmail with

    Squish.exe SQUASH

    it should create some packets in your outbound directory.

    What mailer and BBS software are you using ?


    --- Maximus/2 3.01
    * Origin: Top Hat 2 BBS (1:343/41)
  • From Peter Knapper@3:772/1 to Gord Hannah on Saturday, February 24, 2007 15:25:24
    Hi Gord,

    Are you sure that SCHEDULE is being triggered?

    Nope not being triggered. I posted my route.cfg in its entirety.

    Written on: 22-Feb-2007 08:39

    Hmmm, not seen here, nothing from you dated 22-Feb... Where did you post it, this Echo?

    Cheers..............pk.


    --- Maximus/2 3.01
    * Origin: === Maxie BBS. Ak, NZ +64 9 444-0989 === (3:772/1)
  • From Gord Hannah@1:17/23 to Peter Knapper on Friday, February 23, 2007 21:20:31

    Hi Peter, hope you are having a nice day! :-)

    24-Feb-07 15:25:24, Peter Knapper wrote to Gord Hannah
    Subject: Routing Netmail

    Hmmm, not seen here, nothing from you dated 22-Feb... Where did you post it, this Echo.

    In this echo, and the message you replied to. I think it is fixed now.
    Will road test next week. Am upset that timEd will not do AKA
    matching in echo mail areas. :-( Will need to use GoldEd (yuck). Or
    stick with Termail.


    Written on: 23-Feb-2007 21:20


    Hope this helps. Keep us posted.

    We are a fine board trying to make it better.

    http://www.pris.bc.ca/ghannah
    ghannah@pris.bc.ca
    Cheers!
    Gord Hannah
    -=Team OS/2=-

    --- Terminate 5.00/Pro*at Test and Support Site
    * Origin: Marsh BBS (c) Dawson Creek BC Canada (1:17/23)
  • From andrew clarke@3:633/267.666 to Gord Hannah on Tuesday, March 06, 2007 02:43:46
    Fri 2007-02-23 21:20, Gord Hannah (1:17/23) wrote to Peter Knapper:

    Am upset that timEd will not do AKA matching in echo mail areas.

    As per my message in the ARTWARE echo, use the -p parameter in your SQUISH.CFG,
    and timEd will use that address for the MSGID and Origin line of the message:

    EchoArea tub /home/fidonet/msg/fidonet/tub -$ -p3:633/267.666 1:379/1 3:633/267.1 3:633/270

    I am demonstrating it in this message. 3:633/267.666 is not my real address, obviously. :-)

    -- mail@ozzmosis.com

    --- timEd/FreeBSD 1.11.b2
    * Origin: Blizzard of Ozz, Melbourne, Victoria, Australia (3:633/267.666)
  • From Sean Dennis@1:18/200 to andrew clarke on Monday, March 05, 2007 20:34:51
    andrew clarke wrote in a message to Gord Hannah:

    As per my message in the ARTWARE echo, use the -p parameter in your

    I guess I should get the ARTWARE echo since I wrote an ANSI viewer that was designed to work with TimEd specifically, huh? :)

    Later,
    Sean

    // sean@outpostbbs.net | http://outpostbbs.net | ICQ: 19965647

    --- timEd/2 1.10.y2k+
    * Origin: Outpost BBS -- bbs.outpostbbs.net -- Johnson City, TN (1:18/200)