Howdy!,

I have a Epson NX430 all in one printer/scanner.

A long tme ago I raised the Document Cover to Scan something and the
Cover came off of the unit.

I have tried and tried again and again to put the Hinges back in the
two slots at the back but never have been able to get both of them in correctly.

The last time I tried one of the Hinges got all the way down in its slot,
the other Hinge stayed up about 1/8 inch, and when I scan a small piece
of paper I can see a Black wedge shape mark on the Left side of the
Preview Screen.

The NX430 Manual doesn't have any information about replacing the Document Cover.

I tried again some yesterday and decided to submit a Comment to Epson Support. The answer I got from Epson is to take it to a Epson Service Shop.

Their closest Shop is 70 miles from where I live, so I thought to write here about my problem because I can read BBS messages sitting in my home.

Thanks for reading.

73 de Ed W9ODR . .

... XT or AT, it makes a big difference.
--- MultiMail/MS-DOS v0.49
* Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)

Hi! Ed,

On 19 May 20 23:47, you wrote to All:

Thanks for reading.

My first thought was, 'use a bigger hammer'. Then, have you checked EwwToob? (I haven't.)

Sorry, I'm done for the day and am trying to wind-down. Seven hours/day is enough.

Cheers,
Paul.

... Health Authority warning: Multitasking causes schizophrenia.
--- GoldED+/LNX 1.1.5-b20130515
* Origin: Quinn's Rock - Live from Paul's Xubuntu desktop! (3:640/1384)

Hi! Ed,

On 19 May 20 23:47, you wrote to All:

I have a Epson NX430 all in one printer/scanner.

I had a quick sticky-beak at Uncle Google & YT. It's general layout is similar to my Canon MX320. You're lucky though, as the top cover on the Canon has the 'front panel electronic doo-hickeys embedded in it - it's a heavy sucker to lift gently.

The NX430 Manual doesn't have any information about replacing the
Document Cover.

I didn't see anything on-line either but I'm thinking: think back to when you whipped the cover off... did you maybe do it at a low angle? Maybe it fits in/on at a slight angle or within a certain allowable range. Do you remember how you did it on the day? Might help...?

Cheers,
Paul.

... I ruin my day when I've put the Left Sock on my Right Foot.
--- GoldED+/LNX 1.1.5-b20130515
* Origin: Quinn's Rock - Live from Paul's Xubuntu desktop! (3:640/1384)

05-20-20 23:02 Paul Quinn wrote to Ed Vance about Epson NX430
Howdy! Paul,

@MSGID: <5EC54661.2077.windowsb@capitolcityonline.net>
@REPLY: <5EC4A86D.2075.windowsb@capitolcityonline.net>
Hi! Ed,

On 19 May 20 23:47, you wrote to All:

I have a Epson NX430 all in one printer/scanner.

I had a quick sticky-beak at Uncle Google & YT. It's general layout is similar to my Canon MX320. You're lucky though, as the top cover on
the Canon has the 'front panel electronic doo-hickeys embedded in it - it's a heavy sucker to lift gently.

I hadn't thought of seeing if YT had any help there for RE-inserting the Document Cover on a Epson NX430.
YT might be of help sometimes, but I haven't thought looking there. THANKS!!!!!!!!!!

The NX430 Manual doesn't have any information about replacing the
Document Cover.

I didn't see anything on-line either but I'm thinking: think back to
when you whipped the cover off... did you maybe do it at a low angle? Maybe it fits in/on at a slight angle or within a certain allowable
range. Do you remember how you did it on the day? Might help...?

Thanks Again for taking the effort for me.

I have tried to replace it at different angles.

Both Hinges have pins on both ends of them.
I will take a look at it with a magnifying glass and see if there is a
Guide to help correctly place the Document Cover Hinges back into the unit.

Haste makes waste. But of course, I haven't hurried doing that job.
As Bugs Bunny (I think) said: "Be very very careful".
Or was that Daffy Duck saying that? HUMMMM?

I know from my past mess ups not to get in a rush when I try fixing
anything. Been there, done that. <G R I N>

73 de Ed W9ODR . .


... Nothing is foolproof. The fools are too ingenious.
--- MultiMail/MS-DOS v0.49
* Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)

On 19 May 20 23:47:00, Ed Vance said the following to All:

I have a Epson NX430 all in one printer/scanner.

A long tme ago I raised the Document Cover to Scan something and the
Cover came off of the unit.

You may not find replacement hinges or parts easily for these all-in-one printers. These printers are made so cheaply that you may find its better just to find a replacement NX430 on Ebay if you really like that printer model.

I see a complete NX430 going for roughly $70cdn plus shipping.

Nick

--- Renegade vY2Ka2
* Origin: Joey, do you like movies about gladiators? (1:229/426)

Hi! Ed,

On 20 May 20 21:46, you wrote to me:

Both Hinges have pins on both ends of them.

I had a thought this afternoon: start inserting with the other end. The end you've connected might be engineered to fit after the other end. Mmm...?

Cheers,
Paul.

... If it walks out of your refrigerator, let it go.
--- GoldED+/LNX 1.1.5-b20130515
* Origin: Quinn's Rock - Live from Paul's Xubuntu desktop! (3:640/1384)

Haste makes waste. But of course, I haven't hurried doing that job.
As Bugs Bunny (I think) said: "Be very very careful".
Or was that Daffy Duck saying that? HUMMMM?

I believe it was usually Elmer Fudd, as in "Be very, very quiet... I'm
hunting wabbit." :)

Mike

---
* SLMR 2.1a * Mike Powell, Sysop *The PAN-AMERICAN* 502/875-8938 * v34+
* Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)

05-20-20 23:38 Nick Andre wrote to Ed Vance about Re: Epson NX430
Howdy! Nick,

@MSGID: <5EC61A24.2079.windowsb@capitolcityonline.net>
@REPLY: <5EC4A86D.2075.windowsb@capitolcityonline.net>
On 19 May 20 23:47:00, Ed Vance said the following to All:

I have a Epson NX430 all in one printer/scanner.

A long tme ago I raised the Document Cover to Scan something and the
Cover came off of the unit.

You may not find replacement hinges or parts easily for these
all-in-one printers. These printers are made so cheaply that you may
find its better just to find a replacement NX430 on Ebay if you really like that printer model.

I see a complete NX430 going for roughly $70cdn plus shipping.

The plastic Hinges on the back of the Document Cover aren't broken, I just can't figure out how to replace that thing.

Thanks!, 73 de Ed W9ODR . .



... The best defense is to stay out of range.
--- MultiMail/MS-DOS v0.49
* Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)

05-21-20 20:30 Paul Quinn wrote to Ed Vance about Epson NX430
Howdy! Paul,

@MSGID: <5EC697FB.2080.windowsb@capitolcityonline.net>
@REPLY: <5EC5DDA0.2078.windowsb@capitolcityonline.net>
Hi! Ed,

On 20 May 20 21:46, you wrote to me:

Both Hinges have pins on both ends of them.

I had a thought this afternoon: start inserting with the other end.
The end you've connected might be engineered to fit after the other
end. Mmm...?

I have tried several different angles to get it back in correctly but still fail.

I guess I just haven't held my mouth right (as a Pool Player does) to do the job correctly.

Thanks!

73 de Ed W9ODR . .


... The most expensive component is the one that breaks.
--- MultiMail/MS-DOS v0.49
* Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)

05-21-20 10:58 Mike Powell wrote to ED VANCE about Re: Epson NX430
Howdy! Mike,

@MSGID: <5EC69AAE.2081.windowsb@capitolcityonline.net>
@REPLY: <5EC5DDA0.2078.windowsb@capitolcityonline.net>

Haste makes waste. But of course, I haven't hurried doing that job.
As Bugs Bunny (I think) said: "Be very very careful".
Or was that Daffy Duck saying that? HUMMMM?

I believe it was usually Elmer Fudd, as in "Be very, very quiet... I'm hunting wabbit." :)

YES!, That's the Man! Thank You for setting me straight.

73 de Ed W9ODR . .


... His eyes are so bad, he has to wear contact lenses to see his glasses.
--- MultiMail/MS-DOS v0.49
* Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)

Hi! Ed,

On 22 May 20 06:38, you wrote to me:

I have tried several different angles to get it back in correctly but still fail.
I guess I just haven't held my mouth right (as a Pool Player does) to
do the job correctly.

I knew you would so I didn't say. But, t'other day I had a ghee-whiz idea: 'bribe a know-it-all teenager'.

Ya never know, a burger & fries could save you further heartburn. ;)

Cheers,
Paul.

... If it is it is, then it's it's. If it isn't, then it's its.
--- GoldED+/LNX 1.1.5-b20130515
* Origin: Quinn's Rock - Live from Paul's Xubuntu desktop! (3:640/1384)

Howdy,

Paul, today I held my mouth in the correct way and the Document Cover is back in place on the Epson NX430 AIO Printer/Scanner.

Thanks to You and also Nick and Mike for the suggestions to help me repair
this unit.

What I did is:
I put the Right Hinge in place first, and then I tried "Very Carefully" to gently bend the Document Cover but it wouldn't let me get the Left Hinge into the slot.

I don't see that Black wedge shape on the side of the Scanners Preview window anymore. Hallelujah!!!!!!!!!!!!!!

So I put the Left Hinge in place first, and then tried "Very Carefully" to gently bend the Document Cover and got the Left Hinge to go in to its slot.

I try to keep sane in this room when I'm using the computer(s) and stay away from that "IN" Crowd.

"IN" as in insane crowd. <G R I N>

I'm glad to be able to get Technical Help from People that are BBS Users and are more knowledgeable than I'll ever get to be.

Thanks All!

73 de Ed W9ODR . .


--- MultiMail/Win32 v0.50
* Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)

05-21-20 10:58 Mike Powell wrote to ED VANCE about Re: Epson NX430
Howdy! Mike,

@MSGID: <5EC69AAE.2081.windowsb@capitolcityonline.net>
@REPLY: <5EC5DDA0.2078.windowsb@capitolcityonline.net>

Haste makes waste. But of course, I haven't hurried doing that job.
As Bugs Bunny (I think) said: "Be very very careful".
Or was that Daffy Duck saying that? HUMMMM?

I believe it was usually Elmer Fudd, as in "Be very, very quiet... I'm hunting wabbit." :)

YES!, That's the Man! Thank You for setting me straight.

Is that the really old dot matrix printer? The last time I used one was back in 1990. .
.

... His eyes are so bad, he has to wear contact lenses to see his glasses. --- MultiMail/MS-DOS v0.49
* Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)

--- SBBSecho 3.10-Linux
* Origin: sbbs.dynu.net 2025 (1:275/201.100)

05-31-20 00:25 Phil Taylor wrote to Ed Vance about Re: Epson NX430
Howdy! Phil,

@MSGID: <5ED3C70A.2089.windowsb@capitolcityonline.net>
@REPLY: <5EC7ACE6.2084.windowsb@capitolcityonline.net>

05-21-20 10:58 Mike Powell wrote to ED VANCE about Re: Epson NX430

-snip-

Is that the really old dot matrix printer? The last time I used one was back in 1990. .
.

No, the model name is Epson Stylus FX430, it is an AIO Ink Jet Printer-Scanner.


73 de Ed W9ODR . .



... Have you checked your smoke detector batteries & Fire Ext, LATELY?!
--- MultiMail/MS-DOS v0.49
* Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)